Mobile

How to root your Samsung Galaxy S6

Android is a highly customizable operating system. Manufacturers ranging from Samsung to Huawei, HTC and Sony, all have been tuning this operating system as per their respective needs. Huawei’s user interface EMUI, Samsung’s TouchWiz, and HTC Sense all bear great differences from the stock Android. Android also has also given a certain degree of freedom to its users to which they can customize their android experience. Some users only install custom launchers, while some users go on and root their smartphones for added freedom.

We already know what Android rooting really is. We have also told you about rooting your Samsung Galaxy S3, S4, and S5. Today, we will be talking about how can you root your Samsung Galaxy S6.

You can root your smartphones through many different ways. We will be rooting Android 5.0.2 (official firmware by Samsung) on Samsung Galaxy S6 SM-G920F using ODIN and the widely trusted CF Auto-Root tool.

Disclaimer: Rooting your Samsung smartphone will void its manufacturer’s warranty and you may damage your device. In case of any damage in any form while following this tutorial, TJ is not to be held responsible in anyways. Proceed at your own risk.

Process:

1. Back-Up

Although the chances are less that you would loose your data or damage the device in totality, it is always recommended that you do a back-up of the data stored on your smartphone.
You can either

  • Copy all the data from you mobile to your SD card and remove it.
  • Transfer data to your PC.
  • Backups can also be done through using Samsung Kies.

2. Download USB drivers for your Samsung Galaxy S6

Download the drivers and install them on your computer, so that you can connect your smartphone with your PC successfully. Use the following links.
Either

3. Enable USB debugging mode on your S6

In order to enable the USB debugging mode follow these steps.

  • Go to Settings on your smartphone
  • Scroll down and find ‘Developer Options’ and tap there
  • Enable USB debugging and OEM Unlocking

By default the Developer Options isn’t visible in Settings menu. You, however, can make it visible by following these steps.

  • Go to Settings on your smartphone
  • Scroll down till you see “About Device” or “About Phone” and tap there
  • Tap on Build Number for 5-7 times to make the Developer Options visible
  • Now follow the standard steps to enable USB debugging and OEM Unlocking

4. Download the root package for your S6

You will be required to download the root package for your S6. The root packages are different for every variant of the Samsung Galaxy S6, depending on your region of purchase. In Pakistan, the model mostly is SM-G920F. But do follow the quick easy steps given below to check what model you really are on.

  • Go to Settings on your smartphone
  • Scroll down till you see “About Device” or “About Phone” and tap there
  • Note down the model number

Now using the link download the root package for your SM-G920F. Extract the Galaxy S6 CF Auto Root package and save the files in a folder in your computer.

After downloading the firmware, you would need to download Odin

Before you finally go on to the next step, make sure that your device has sufficient battery backup in it. Also, deactivate any anti-virus program in your computer so that it does not disturb the process.

5. Open your smartphone in Fastboot mode

Open your smartphone in Fastboot mode by following these steps.

  • Make sure that your smartphone is not connected to any PC.
  • Switch off your smartphone.
  • Press and hold the Volume Down, Home simultaneously and then press the Power button till you see a warning sign.
  • If agreeing, press Volume Up to confirm.

Once your device boots into the download mode, connect it to your computer using the original USB data cable.

6. Process on your PC

After connecting your device, open the folder where you have extracted the Odin.

  • Find the Odin3.exe and open it. If you have proper USB drivers of your device in your PC, one of the ID:COM portals will turn yellow. This might take some time.
  • Click on the ‘PDA’ and browse to the file that you have to flash on your phone. This is the CF Auto-Root file you had downloaded earlier. Select the extracted file.
  • Check the Auto Reboot and F. Reset Time boxes.
  • Click on the ‘Start’ button.

After sometime, your smartphone will reboot automatically, after which you can disconnect your smartphone from the PC. Check for the SuperSU application in the app drawer to confirm if your smartphone has succesfully be rooted or not.

Want such a how-to rooting guide of any other phone? Just mention name of the smartphone in the comments section below and we will be more than happy to look into it.

Image — Android Authority

Sponsored
Muneeb Ahmad

I love to talk about global tech-happenings, startups, industry, education and economy. Get in touch: muneeb@techjuice.pk.

Share
Published by
Muneeb Ahmad

Recent Posts

SBP Announces December 25 as a Bank Holiday

The State Bank of Pakistan (SBP) has officially declared Wednesday, December 25, 2024, as a…

2 mins ago

Greentree Holdings Ltd Aims for 35% Stake in TRG Pakistan

AKD Securities, the manager of the offer, informed the main stock exchange on Monday that…

26 mins ago

PTV Faces Criticism Over Misleading Chemotherapy Statements

ISLAMABAD: On Pakistan Television (PTV), medical experts raised serious concerns over false information on chemotherapy…

55 mins ago

OpenAI Rolls Out Advanced Voice Mode for macOS ChatGPT App

OpenAI has introduced Advanced Voice Mode to ChatGPT's desktop applications for macOS apps, enabling users…

1 hour ago

Garena Free Fire India Launch Rumors: What Fans Need to Know

Reports suggest that Garena Free Fire is set to make a much-anticipated return to India.…

19 hours ago

Albania Bans TikTok for One Year: Here’s the Reason!

The Albanian government has announced a ban on the social media platform TikTok for a…

23 hours ago